Polycom Phones

In the documents below you will find all the settings required to configure a Polycom IP phone. You are welcome to follow these documents to configure the device manually. However please note that you can download the configuration files directly from the PBX admin interface.

Once you have completed the setup wizard and entered the data for all users, gateways and adapters you can generate the config files and then can upload them directly using the device admin interface. The wizard to create the configuration files is available going to Toolbox and then Settings. At the end of the wizard you can download the config files and access the manual explaining how to upload the same files using the web interface of the device in question.

Configuration of Polycom IP33x IP Phone

Configuration of Polycom VVX IP Phone